GMC Truck Forum banner
1 - 9 of 9 Posts

·
Registered
Joined
·
296 Posts
Discussion Starter · #1 ·
How much of this stuff should i order to paint my entire frame? Im going to get the Por 15, Chassis Coat Black topcoat, and i guess Metal Ready to prep it.
 

·
Drive It Like Ya Stole It
Joined
·
6,656 Posts
it goes a long ways, a quart of each has a good chance of doing it. BTW prep is the key, get ALL of the undercoating and grease off. You need to use their marine clean to degrease it.
 

·
Registered
Joined
·
296 Posts
Discussion Starter · #3 ·
Dark Eternal said:
it goes a long ways, a quart of each has a good chance of doing it. BTW prep is the key, get ALL of the undercoating and grease off. You need to use their marine clean to degrease it.
I dont think i have any sort of undercoating on there right now.
 

·
Registered
Joined
·
296 Posts
Discussion Starter · #7 ·
Sounds good, i think im going to order 1 qt of all four products.
 

·
Registered
Joined
·
496 Posts
i used about 1-1/2 quarts on an s-10 frame...that was about 5 coats
 

·
Registered
Joined
·
296 Posts
Discussion Starter · #9 ·
Feed said:
i used about 1-1/2 quarts on an s-10 frame...that was about 5 coats
Why did you do 5 coats?
 
1 - 9 of 9 Posts
Top