GMC Truck Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
5,693 Posts
to measure the bs, i think you lay the wheel face down. then get a straight edge and set across the wheel. measure from the back of the mounting surface to the bottom of that straight edge. on an 8" wheel, you'll want 5.5" of bs, which i doubt that wheel will have. but you should be fine as long as you run like a 245/40 tire.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top