GMC Truck Forum banner
1 - 7 of 7 Posts

·
Registered
Joined
·
353 Posts
Discussion Starter · #1 ·
I have heard stuff about you have to flip the upper control arm and get new lower ball joints and flip them over. Is this true. What all is involved in the install. Any one got a link to the install instructions?
 

·
Orale Homes....
Joined
·
1,796 Posts
The tahoe spindles are easier to install since it's a direct swap, however you need 17+ inch wheels to run those.
 

·
CaddyHack
Joined
·
574 Posts
I dont think you have to do that with the Mcguaheys. From what I heard, they bolt on like a factory spindle. The Belltech's you have to.
 

·
Orale Homes....
Joined
·
1,796 Posts
5.3vortec said:
So with the tahoe spindle there is not flipping ball joints or a-arms?
Nope. Direct bolt on...

I think you have to do something with the regular truck Mcgaughys spindles, but I forgot what it was....
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top