GMC Truck Forum banner
1 - 9 of 9 Posts

·
Registered
Joined
·
5,846 Posts
Discussion Starter · #1 ·
I'm going to get the McGaughy's helper bag kit for the 5"-7" drop ('03 ext. cab) and I need to make sure I order everything at the same time.

An idea of what I'm going for:
-helper bags that will bolt onto my existing McG's c-notch. The kit will have 1/4"? airline going to a single Schraeder (sp?) valve that will be in the gas door. This will be very similar to red02chevy's and Dezert1500's setups. What I need to know is what I need to order aside from the actual kit. Do I need more airline or does the kit come with adequate length to make a T and get to the gas door? I cannot find specs on the kit anywhere

thanks
-John
 

·
Registered
Joined
·
2,523 Posts
id plan on ordering some extra line, they usually give the bare minimum with those kind of kits
 

·
Registered
Joined
·
1,659 Posts
Mine came whit enought air line when i got it from Tim. Both bag air lines go into a "T" fitting then to my gas door. Im sure all the kits include the same air line hardware, but ask Tim to be 100%.
 

·
Registered
Joined
·
5,846 Posts
Discussion Starter · #4 ·
so did it come with the valve you have in your gas door or did you buy one?
 

·
Registered
Joined
·
5,846 Posts
Discussion Starter · #6 ·
thanks for the help, they're on the way now from Tim
 

·
Registered
Joined
·
1,121 Posts
a hd hood would look good on ur truck.
 

·
Registered
Joined
·
169 Posts
My kit came with enough air line to run from both bags to the T then out the liscence plate hole with a foot or two to spare
 
1 - 9 of 9 Posts
Top