GMC Truck Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
94 Posts
Discussion Starter #1
I am installing a couple switches (alarm stuff and stereo stuff) tonight 7/30. I want to either mount them in the pocket above my dim switch (next to the drivers side vent) which has nothing in it. Or use one of those 3 sections next to the auto/off airbag switch. The question is... Which would be easiest and cheapest to get a stock piece again and does anyone have one. I want to be able to go back to stock and I was just making sure I can get that piece again if need be. Thanks
 

·
Registered
Joined
·
169 Posts
PM 1truess, he made a pretty trick switch panel that goes above the dim switch. I think he used an extra fuse panel cover, cut it to fit and used that to mount the switches in that spot. That way you could keep that little pocket and replace it if needed. I would also use a fuse panel from the junkyard so you don't trash yours. I hope that makes sense. :crazy:
 
1 - 2 of 2 Posts
Top