GMC Truck Forum banner

1 - 5 of 5 Posts

·
Drive It Like Ya Stole It
Joined
·
6,656 Posts
just drain the old and make sure there is no mud/water or lots of shavings comming out of it. You can remove the cover and make sure all is ok and check the magnet for shavings as well. Then just simply put new shit in to the fill line. Its a pretty simple job.
 

·
HOT AIR BALLOON OWNER
Joined
·
14,932 Posts
Just have some LSD additive if you have one from the factory, I believe it uses 75W90 Syn out back...take the fill plug out FIRST also.
 
1 - 5 of 5 Posts
Top