GMC Truck Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
20 Posts
Discussion Starter #1
I posted this in another forum so I will try posting it here.
Truck is an 02 GMC 3500 Sierra Crew Cab..
Im driving along and I go to roll down the Drivers side window, I miss the button and accidentally press the rectangular button that disables all the other windows if depressed, the button springs back up and the rectangular face comes off the mechanical part of the switch and falls on the floor. I find it and put it back on, it clicks back into place and when depressed it stays down like it should and disables all the other windows. I press it again and it comes back up and all the all other windows can now be operated from the switch at each door. But now the drivers window will not roll up or down. Switch up or down.
Is this a common problem on a teenage GMC?

I haven't taken the door panel off to have a look inside but Im thinking nothing will look out of place.

Any advice to begin trouble shooting would be appreciated.
 

·
Registered
Joined
·
160 Posts
Check 1A Auto or Rock Auto. You can buy a new switch panel on line for fairly cheap. Easy to install. Fixed my problem when my driver side switch would no longer operate the passenger side window.
 
1 - 2 of 2 Posts
Top