GMC Truck Forum banner

Removed rear blocks! NNBS

9290 Views 30 Replies 11 Participants Last post by  07blkchevyz71
:crazy:





1 - 20 of 31 Posts

· Diego Mafia
Joined
·
3,960 Posts
cute
 

· Diego Mafia
Joined
·
3,960 Posts
o ya my truck too. lol
 

· Registered
Joined
·
545 Posts
I tried removing the blocks on my RCSB and the driveshaft fell out of the tranny. It wouldnt stay in with the blocks removed. There was about an inch of gap that caused the shaft to drop out. With the blocks in, it stayed in place.
 

· Speed Holes
Joined
·
5,631 Posts
I tried removing the blocks on my RCSB and the driveshaft fell out of the tranny. It wouldnt stay in with the blocks removed. There was about an inch of gap that caused the shaft to drop out. With the blocks in, it stayed in place.
what? really? :crazy:
You better not be hitting any bumps in that truck then! :think:
 
1 - 20 of 31 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top