GMC Truck Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
73 Posts
Discussion Starter #1
I made the mistake of installing a lift/level kit on my '18 Crew Cab LTZ.
Angles are wat wrong and tires are rubbing on upper control arms.

So I was searching and found the RC 12132 knuckle kit.
It comes with a diff drop, and I can buy it with lifted struts and my choice of rear shocks.

Does anyone have any experience with this kit?

Good kit? Bad kit?

At this point I sorta think anything would be better than what I have.

Thanks
 

·
Super Moderator
Joined
·
5,620 Posts
Your angles still wont be that great, and you have to cut a square hole in your crossmember for the diff drop.

It also wont fix your tire rub issue.
 

·
Registered
Joined
·
73 Posts
Discussion Starter #3
Your angles still wont be that great, and you have to cut a square hole in your crossmember for the diff drop.

It also wont fix your tire rub issue.
OK, what kit do you recommend in the 3-1/2" to 4" range?
Cost is a concern.
 

·
Super Moderator
Joined
·
5,620 Posts
Adding a body lift. There isn’t a “real” lift in that range to keep your angles proper. Till go 4.5in or higher.

Then cost is a concern.

Still won’t help with your tire rub. If your tires are rubbing your control arms then you need a larger offset wheel or narrower tire.

How much of a level did you install? 3in?


Sent from my iPhone using Tapatalk
 
1 - 4 of 4 Posts
Top