GMC Truck Forum banner

Sierra HD bumper swap-help

1794 Views 11 Replies 4 Participants Last post by  09 Rooster
I took the front bumper off my 2009 1500 and was ready to do the HD swap.

I read all about the Silverado swap and assumed (stupid, I know) the bumpers/brackets were the same...well they're not! So my 1500 bumper went back on.

I found one thread about having to cut the bracket on the actual bumper bracket and rewelding it. I have been searching and searching to see if there is a way to do the swap without welding. I have read different guys saying they "slotted" the 1500 brackets but i just dont see how that would work. There isnt much bracket left to slot.

I would like to keep my 1500 upper cap as well since i dont watn to do the HD grill.

Can someone help me out with a picture or even directions on how to slot the Sierra brackets?

1 - 3 of 12 Posts
im so lost it hurts, the only HD part of the bumper is the cap. what year we talking here cause 99-13 the bumper is the same.
i was wrong, i meant 99-10, meaning that all 99-10 1/2 3/4 are the same not that the bumper themselves are the same just that 1/2 and 3/4 share the same bumper.
i never said it didn't. i said 3/4 ton which started in 99.
1 - 3 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.