GMC Truck Forum banner
1 - 1 of 1 Posts

· Registered
3,243 Posts
Discussion Starter · #1 ·
Well, I came to a problem when I went to take out my control unit on my door. In the 99-02 it popped out.. Well the front of it near the dash, it is held in by a screw from the underside. And has a clip on the back side... So instead of breaking it Like me, just take out the bolts in the door and pull the door panel off, let it hang and just pull the plugs out from the control unit... Then if you need to take that out you can unscrew it... Hope this helps, and no one else will break theres like I did... it tucks back tight so it doesnt matter that I broke it, but just giving everyone with an 04 maybe the 03's are the same some info ahead of time...
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.