GMC Truck Forum banner

Some Pointers for installing Escy Handles in an 04

1094 0
Well, I came to a problem when I went to take out my control unit on my door. In the 99-02 it popped out.. Well the front of it near the dash, it is held in by a screw from the underside. And has a clip on the back side... So instead of breaking it Like me, just take out the bolts in the door and pull the door panel off, let it hang and just pull the plugs out from the control unit... Then if you need to take that out you can unscrew it... Hope this helps, and no one else will break theres like I did... it tucks back tight so it doesnt matter that I broke it, but just giving everyone with an 04 maybe the 03's are the same some info ahead of time...
Top