GMC Truck Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
626 Posts
Discussion Starter #1
I've been searching and I can't really find much info for a smaller lift. I recently bought some RC 1.5" coil spacers and was going to order some 285/55/20 tires for stock 20's but I don't think they will fit well and now I'm not sure the RC spacers are a good idea.

I might just buy some 3" spindles for the front and run a 285/55/20 or 295/55/20 on it. Will that work out well? I need to know so I can order the tires.

Thanks, guys.
 

·
Your welcome
Joined
·
1,581 Posts
I ran stock 20s on a 2.5 level and 3" spindles and rubbed with 295's. It's not terrible but you have to trim some plastic! With my new 20x9 rims I had to trim a little more. I don't know if you could run 295s on just spindles though
 

·
Registered
Joined
·
626 Posts
Discussion Starter #3
Damn okay so I might have to stick with the 285 55 20. I might buy aftermarket wheels as well but I have NO idea what BS I need in an 18-20x9
 

·
Registered
Joined
·
626 Posts
Discussion Starter #4
How about a 20x9 Fuel wheels with +14 offset and some 285/55/20 Toyo AT-XT

Or

17x9 Fuel wheels with the same offset with 285/70/17
 
1 - 5 of 5 Posts
Top