GMC Truck Forum banner
1 - 20 of 31 Posts

·
FFR Fabrication
Joined
·
8,144 Posts
Discussion Starter · #1 ·
Anyone have a link or any numbers for ALL Torque specs for 03-06 Chevy 1500 4wd. I'm looking for everything suspension wise basically. LCA's, UCA's, etc etc.

Thanks
 

·
DeepSouth Gangster
Joined
·
5,669 Posts
German torque: "Good-'n-tight".
 

·
FFR Fabrication
Joined
·
8,144 Posts
Discussion Starter · #4 ·

·
FFR Fabrication
Joined
·
8,144 Posts
Discussion Starter · #6 ·
All good. Is there any sites that might have ALL of the info?
 

·
CENTEXOFFROAD
Joined
·
1,348 Posts
2008 Chevrolet Silverado - 4WD | Sierra, Silverado (VIN C/K) Service Manual | Suspension | Front Suspension | Specifications

Fastener Tightening Specifications
Application
Specification

Metric
English

Brake Hose Bracket Bolt
9 N·m
80 lb in

Brake Hose Clip Bolts
12 N·m
106 lb in

Hub and Bearing Assembly to Steering Knuckle Bolts
180 N·m
133 lb ft

Lower Ball Joint Stud Nut
125 N·m
92 lb ft

Lower Control Arm to Frame Nuts
175 N·m
129 lb ft

Shock Absorber Module to Frame Nuts
50 N·m
37 lb ft

Shock Absorber Module to Lower Control Arm Bolt - 1500 Series
50 N·m
37 lb ft

Shock Absorber Electrical Connector
20 N·m
15 lb ft

Shock Absorber Nut - 1500 Series
890 N·m
59 lb ft

Shock Absorber Nut - 2500 Series
24 N·m
17 lb ft

Shock Absorber to Lower Control Arm Bolts - 2500 Series
80 N·m
59 lb ft

Spring Jounce Bumper Nut - 2500 Series
30 N·m
22 lb ft

Stabilizer Shaft Insulator Clamp Bolts
50 N·m
37 lb ft

Stabilizer Shaft Link Nuts - 1500 Series
23 N·m
17 lb ft

Stabilizer Shaft Link Nuts - 2500 Series
23 N·m
17 lb ft

Torsion Bar Crossmember to Frame Bushing Bolt
95 N·m
70 lb ft

Torsion Bar Support Link Bolt
95 N·m
70 lb ft

Upper Ball Joint Stud Nut
50 N·m
37 lb ft

Upper Control Arm to Frame Nuts
190 N·m
140 lb ft

Wheel Drive Shaft to Front Hub Nut
240 N·m
177 lb ft

Wheel Speed Sensor Mounting Bolt
18 N·m
13 lb ft


2008 Chevrolet Silverado - 4WD | Sierra, Silverado (VIN C/K) Service Manual | Suspension | Rear Suspension | Specifications

Fastener Tightening Specifications
Application
Specification

Metric
English

Leaf Spring Mounting Nut
200 N·m
148 lb ft

Rear Leaf Spring Shackle Nut - 1500, 2500, 3500
95 N·m
70 lb ft

Rear Shock Absorber Upper Bolt - 1500, 2500, 3500
115 N·m
85 lb ft

Rear Shock Absorber Lower Bolt - 1500, 2500, 3500
115 N·m
85 lb ft

Rear Spring/Hanger Bolt
50 N·m
37 lb ft

Rear Spring Stop-3500
50 N·m
37 lb ft

Rear Stabilizer Shaft Insulator Nut - 3500
32 N·m
24 lb ft

Rear Stabilizer Shaft Link Bolt (Frame Side of Link) - 3500
95 N·m
70 lb ft

Rear Stabilizer Shaft Link Nut (Bar Side of Link) - 3500
53 N·m
39 lb ft

Rear Suspension Jounce Bumper
32 N·m
24 lb ft

U-bolts - 1500
100 N·m
74 lb ft

U-bolts - 2500/3500
160 N·m
118 lb ft
 

·
FFR Fabrication
Joined
·
8,144 Posts
Discussion Starter · #10 ·
If I have to buy a book, I have to buy a book. I just need it asap. Pismo in 1 week, and I still need to get my alignment to hold and my 4wd working:nono:
 

·
FFR Fabrication
Joined
·
8,144 Posts
Discussion Starter · #12 ·
Thank you sir :shake: I doubt they're different or much different then each other. Thank you for finding that :shake:
 

·
CENTEXOFFROAD
Joined
·
1,348 Posts

·
FFR Fabrication
Joined
·
8,144 Posts
Discussion Starter · #16 ·
I need to retorque everything on my truck also, havent done it since I put the kit on. These meets always fly up on you
It seems shit gets loose on mine every 300 miles or so. Loctite is on as well and torqued "tight as shit".
 

·
Fake 4wd Club
Joined
·
3,942 Posts
Use Green Honda Bond, you think I'm making this shit up but I'm not, it works. :read:
 

·
WANT LIFT!!!
2015 GMC Sierra - Crew/Std bed, 5.3, 4x4, max tow
Joined
·
3,303 Posts
I tighten until the turtle head just kisses the drawers. I have to get new underwear every 3-4,000 miles.
 
1 - 20 of 31 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top