Switching From Belltech spindles to Mcgauhys

1400 Views 4 Replies 4 Participants Last post by 02White6.0, Feb 23, 2004

chaddurst

Discussion Starter · #1 · Feb 21, 2004

I have BellTech 2 inch drop spindles on my truck right now with my air bags and I am wanting to switch to the Mcgauhys for obvious reasons. Has anyone done this and if so what changes have you run into? I know that my balljoints were flipped with the Belltech spindles. Will I have to buy new control arms for this or can i just replace the ball joints. i have heard different stories on that. Thanks for the help.

1 - 5 of 5 Posts

chaddurst

· CaddyHack

Joined Jan 9, 2004

·

643 Posts

Discussion Starter · #2 · Feb 22, 2004

Anyone, Bueller, anyone?

Josh

· Line-X of San Antonio

Joined Nov 25, 2003

·

7,228 Posts

#3 · Feb 22, 2004

you can switch the balljoints back over and flip the UCAs back to normal position. i have done this to put stock spindles back on.

groundscraper

· Orale Homes....

Joined Jan 12, 2004

·

2,030 Posts

#4 · Feb 23, 2004

lowred said:
you can switch the balljoints back over and flip the UCAs back to normal position. i have done this to put stock spindles back on.

:word:

02White6.0

· Registered

Joined Jan 9, 2004

·

3,010 Posts

#5 · Feb 23, 2004

thats why you use lcas :read:

1 - 5 of 5 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.