GMC Truck Forum banner

1 - 7 of 7 Posts

·
rockin wheelies
Joined
·
284 Posts
Discussion Starter #1
I have a 98 gmc sierra and the left tail light keeps going out. i dont know if the rough roads are shaking the filements in the bulbs loose and blowing them or if the light just gets loose in the socket. any advice is welcome :bowtie:
 

·
Registered
Joined
·
299 Posts
it could be contact with the bulb in the housing..im havin a hell of a time with my parkin lamps right now doin that. I went to change out the bulbs and now nothing with stay in there right. Im not sure if i need to clean them out hella good or splice in some new housings.
 

·
rockin wheelies
Joined
·
284 Posts
Discussion Starter #3
Could it be corosion in the housing if so thats easy its to late to check it now i will check tomorrow. P.S. I'm on the phone with my girlfriend and i told her about the site and the told me to tell you all that she said hi. :bowtie:
 

·
Registered
Joined
·
299 Posts
u know how to deal with corosion, i really have no idea how to clean the housings out. Im so pissed off about my my parkin lamps not workin, cause now my blinkers are flashin all hella fast n stuff.
 

·
rockin wheelies
Joined
·
284 Posts
Discussion Starter #5
yeah thats what mine are doing if you have corrosion you can make a paste of backing soda and water and mix it together use an old tooth brush and srub the corrosion off let it sit a minute or 2 and rinse it off with water :bowtie:
 

·
Need Moar Low
Joined
·
2,286 Posts
Re: Jimmy's Build Thread

Diet coke works good

Sent from my SAMSUNG-SGH-I777 using Tapatalk
 

·
Registered
Joined
·
3,481 Posts
yeah thats what mine are doing if you have corrosion you can make a paste of backing soda and water and mix it together use an old tooth brush and srub the corrosion off let it sit a minute or 2 and rinse it off with water :bowtie:
then spray the shit out of it with wd40 and use dialectic grease.
 
1 - 7 of 7 Posts
Top