GMC Truck Forum banner

TB question.

930 Views 10 Replies 6 Participants Last post by  Unknown808
the back part of my torsion bar is rubbing on the inside of the back part of TB crossmember on my drivers side. its making a squeaking noise. has anyone had this? also, my passenger side wont get as high as the drivers side is at half crank. the passenger is as far as i can crank with thread left on the adjusting bolt. my pass is 1/2" lower :imo
1 - 1 of 11 Posts

If you still have the pics I sent you a while back check out my cams.

The Passenger side are flipped and the driverside are normal. Both have plenty room for adjustment.
I could crank alot more and still be able to get it in alignment specs fairly easy :imo
1 - 1 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.