GMC Truck Forum banner

The Mrs. is happy

2K views 12 replies 11 participants last post by  03rado 
#1 ·
I finished painting the Wifes handles and she's happy. :hump:



 
See less See more
4
#8 ·
Thanks.
It has about 2 1/2 hours into sanding each handle. Started with 100 grit to remove the texture. Then 600 grit dry followed by 600 wet. 3 cotes of filler primer. Wet sanded with 1500 grit between each cote. 5 cotes of blue. Wet sanded with 2000 grit between each cote. Then ended with 3 cotes of clear. I couldn't get the finish I wanted with the spray gun, so I used an air brush. From start to finish. It took 6 days.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top