GMC Truck Forum banner
1 - 7 of 7 Posts

279 Posts
all you have to do is get a peice of tube that fit in the water lines and 4 small hoes clamps ( to make sure it doesnt leak ).
1.Disconnect the water lines from Throttle body
2.Stick lines on each end of the tube and clamp them down
3.Plug off both ends where you took the lines off the Throttle Body

It is pretty easy , I would think you would feel a differents .. I did , but I did alot of other stuff at the same time .. :dunno:
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.