GMC Truck Forum banner
1 - 5 of 5 Posts

· Registered
Joined
·
106 Posts
Discussion Starter · #1 ·
Just wondering if I'll have any clearance issuses with a 18x9 wheel, BOSS 304 (+14mm offset / 5 1/2 BS) and a bfg A/T 285/65/18 overall dia is 32.8 and width is 11.5 on a 8.5"wheel. I'm pretty sure I'll have to crank the TB's a bit, but I'm not sure? It's a 2002 k1500 ecsb GMC Sierra. I want 18's to clear the BAER alumasport system I plan on buying in the future. Thanks
 

· BIG boys want BIG toys
Joined
·
271 Posts
I have 285/65/16 on a 99 Z with factory rims, stock TB s cranked 3/4 of the way. The tires fit without rubbing but they may bottom out if you are a extreme off roader. J C Witney has Torsion bar ajuster keys and 2'' blocks for the back. about $120 Hope I could help
 

· Registered
Joined
·
106 Posts
Discussion Starter · #5 ·
Uhh I'm confused but , my truck is a 4x4
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top