GMC Truck Forum banner

Tire Size for 7" Fabtech

829 Views 9 Replies 8 Participants Last post by  jdrake19
Tire Size for 7" Fabtech with a 3" body lift on a 99-02 gmc 2wd
1 - 10 of 10 Posts

· Registered
Joined
·
15,605 Posts
I used to have a lifted 2wd, 6" fabtech with a 3" body. 9" of total lift, and I ran 33x13.50 baja claws and I thought it looked good. I had enough clearance for skinny 35's, but I know a 36" would've rubbed on the backside of the front fender. For your setup... I would say a 35x12.50 on a 10" wide rim.
 

· I peed in your pool. Yay!
Joined
·
2,875 Posts
What about on a 4wd?, i've seeen a 2001 ex.cab with a 4 inch suspension and a 3 inch body running 37" ssr's with 'minimal' fender trimming. It looked freggin nasty!!!!!!! I got chills. My friend put 315 buckshots on his stock gmc with stock gmc wheels and all he did was cut his air dam. Another friend of mine put 315 bfg a/t's on his chevy with no lift, just a little plastic cutting. ??????? IS, With a 6"+3"body, mickytompson classic 2 wheels 16x10 or 16.5x10, what size SSR's could i fit????????????????????????? Spanks a lot!!!!!!!!!!!!!!!!!!!!!!!!!!!
 
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top