[Da_Rebel]

I was touching up my truck in a few spots, and got a little too much paint on them. I was using a little bottle that had a brush in the cap.
Question is, how do I bring the paint level back down to the same as the surrounding area? I'm going to be spraying on a light coat of clear, so I'm curious as to what anyone else has done in this situation.
Thanks in advance!

 

[silvr z]

wetsand i guess...i never see touch up paint that is blended well.

 

[Chris.]

wetsand with 2-3000 til smooth.

 

[mjmarklu]

wetsand will work but you will have to wheel it out.. you can get some paint thinner and pretty much just wipe off what you dont like but you will probably have to wheel after that as well depending on how hard the touch up has set.

 

[BlkSlvrdo129]

You want to keep a paint solvent nearby and wipe off the excess before it fully dries. If it's fully dried now you might be able to rub it off with a solvent, but be careful not to scratch around the area. It's a tedious process to get a decent coverage that isn't too thick.

 

[cbrsilv15]

What color truck? Metallics are a little harder to deal with, but you just need to wetsand it a little bit and then polish out the light scratches from sanding. No biggie.