GMC Truck Forum banner

Too much touch up paint.

1255 Views 5 Replies 6 Participants Last post by  cbrsilv15
I was touching up my truck in a few spots, and got a little too much paint on them. I was using a little bottle that had a brush in the cap.
Question is, how do I bring the paint level back down to the same as the surrounding area? I'm going to be spraying on a light coat of clear, so I'm curious as to what anyone else has done in this situation.
Thanks in advance!
1 - 1 of 6 Posts
wetsand will work but you will have to wheel it out.. you can get some paint thinner and pretty much just wipe off what you dont like but you will probably have to wheel after that as well depending on how hard the touch up has set.
1 - 1 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.