[MX Assassin]

http://www.topguncustomz.com/Store/Gen2ProdDisplay.php?iview=238695097

Will the 2.5" Topguncustomz leveling kit work with Fabtech? Can't find CCM anywhere. Thanks a ton!!!!

 

[Spugen]

didnt look hard enough

http://www.ccmoffroad.com/shop/index.php?l=product_detail&p=10

 

[MX Assassin]

I tried from there bud, but they were out of stock

 

[J-man67]

The Topgun will not work...completely. You can use the top spacer, but not the bottom. You will only get maybe an inch of lift, instead of the whole 2.5". Most get the CCM top spacer from eBay. It will def work with the Fabtech, although you may want new UCA's as your balljoint angles will be less then ideal.

 

[pacecbria]

I have the CCM kits in stock if you want one pm me

 

[MX Assassin]

The Topgun will not work...completely. You can use the top spacer, but not the bottom. You will only get maybe an inch of lift, instead of the whole 2.5". Most get the CCM top spacer from eBay. It will def work with the Fabtech, although you may want new UCA's as your balljoint angles will be less then ideal.

Awesome, thanks a million Jman, I've searched on ebay but couldn't find a seller for the ccm, I'll keep looking tho! Thanks so much for the lookin out man!!

 

[EarnhardtZ71]

Here you go....CCM on ebay.

http://myworld.ebay.com/ccmoffroad

 

[MX Assassin]

Here you go....CCM on ebay.

http://myworld.ebay.com/ccmoffroad

Thank you kind sir! You're the man :shake:

 

[EarnhardtZ71]

:endofshow

 

[BlackedOutHoe]

I have the CCM kits in stock if you want one pm me

shouldn't you be a vendor to openly sell products on a site your a member of?:think:

 

[08RCSB]

shouldn't you be a vendor to openly sell products on a site your a member of?:think:

:hmm:

 

[pacecbria]

I am not advertising what is up lately. I have got beat down from a ton of people. I was just trying to help this guy out. I won't make a cent off the CCM kit I told him I would ship it to his door for $90 same price that I buy them for because he said he could not find one. If I was on here marketing the piss out of stuff I would pay the vendor fees. But the members on here (75+) that buy from me get the lowest price possible and contacted me via PM. not trying to rant on you I have just been getting bombed everytime I try to help someone out. But everyone that talks to me is happy.

 

[Crunk]

truck is goin to look sick ricky, can't wait to see it all done. holla at me when all the stuff gets in and when you're ready to install. i'll try and lend a hand on my day off.

 

[J-man67]

Awesome, thanks a million Jman, I've searched on ebay but couldn't find a seller for the ccm, I'll keep looking tho! Thanks so much for the lookin out man!!

No problemo!

 

[MX Assassin]

truck is goin to look sick ricky, can't wait to see it all done. holla at me when all the stuff gets in and when you're ready to install. i'll try and lend a hand on my day off.

Thanks buddy! I gotta find the Jesters, Discounttiredirect sent me an email after I ordered online saying that they were out of stock and didn't know a time frame when they'd be back! Searching frantically now! But you better be there dude!!

 

[pacecbria]

SO after everyone made a big deal about me saying I had one and no body else can help this man out. I will still hook him up with one shipped out the day he says he wants it and all for nothing, nada, zip. Which most would consider a loss of money by taking time to to it.

But he will be added to the list of happy GMFS Customers of Pro Installz!!!

 

[J-man67]

Very nice!

 

[SouthernOffRoad]

CCM kits are usually found on ebay by CCM themselves. They have the kits so low, its not even worth any dealer to stock and ship them.

You guys are right, you do have to be a vendor to advertise on here. Some people just dont listen (or they make up crappy excuses).

 

[pacecbria]

Not a crappy excuse DICK I just run a small shop not and try to help people out when I can not make my living off of them. Not saying your in the wrong for making a living just don't beat me up. Its not like I am picketing outside your door taking your customers.

 

[SouthernOffRoad]

Dude, thats exacly what your doing. This forum is the vendors front door of buisness and your picketing on it.

Your breaking forum rules because you are advertising if your having people PM you for pricing. Its simple as that...If your wanting to "help a guy out", just give it to him for free... Everyone knows your making a profit on the products your pushing so dont feed anyone any more lines.
Plus, your breaking manufacturers rules by selling under MAP. Do you know if one of your customers need warranty assistance through a manufacturer on a product you sold under MAP, they will not have any warranty? Also, the manufacturer can sue you for selling under MAP because that is in your dealer agreement (a contract that your in breach of).

Also, nice name calling. This will show everyone just how you are in buisness ethics and customer service...