GMC Truck Forum banner
1 - 16 of 16 Posts

· Registered
Joined
·
351 Posts
Discussion Starter · #1 ·
hey guys I have a 9" with 37s but was looking to go to 33s, I was just wondering if any guys out there are running that and if they could post a pic? thanks!
 

· Registered
Joined
·
878 Posts
Personally speaking.....why the hell would you lift 9" to only keep 33s on? You dont even need to level most trucks to fit 33s
 

· Registered
Joined
·
983 Posts
Truck is currently being somewhat rebuilt, but here are some of it when it had 6" lift and 3" body on 20x12s and 33s






 

· California Castaway
Joined
·
12,442 Posts
hnnnnnnnnnng shoulda kept it.
She went to a good owner; I follow him on IG he hasn't changed anything except got trails to replace the claws when they wore out :favorites13:
 

· 15 RCSB Z71
2018 GMC Sierra All Terrain 6.2L
Joined
·
3,505 Posts
My truck was at 9" when I first installed the foxs with the RCX because they were set too high (now down to 7ish). Only took a few pics at this height and didn't mount my BMF/Toyos because the truck hadn't yet been aligned.





 

· Registered
Joined
·
81 Posts
My truck at 9" with 33's and needing to be swapped out for 35's. Would like to do a x12 with 33's but, not sure how bad the cops around here would be with it.

 
1 - 16 of 16 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top