GMC Truck Forum banner
1 - 4 of 4 Posts

· Registered
Joined
·
234 Posts
Discussion Starter · #1 ·
So I recently swapped all my exterior lights for LEDs (excecpt for the 194 front marker lights) and did the flasher relay mod. When I install my switchbacks the turn signals don't work, they flash once and that's it, also the turn signal indicators stay on solid on the dash all the time. If i turn the headlamp switch to off so no lights are on, the turn signals work ok. What am I missing? I thought it was a bulb problem so I got different bulbs but same issue. Is it back feeding through the grounds? Is it because the front side marker lights are still regualr bulbs? Do I need to separate the grounds for the front switchbacks? Any help is appreciated, getting frustrated. Please feel free to bash me if I missed something obvious!
 

· Registered
Joined
·
2,717 Posts
Did you clip the correct pin on the flasher?
 

· Registered
Joined
·
234 Posts
Discussion Starter · #4 ·
Got it! The lights were back feeding voltage through the side marker since it's wired in parallel to the front park/turn signal. Installed an led 194 bulb in the side markers and all is good
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top