GMC Truck Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
930 Posts
Discussion Starter #1
i going to know what size the torq bolt is on the caliper so i can buy one before a lower it this sunday.
 

·
Line-X of San Antonio
Joined
·
5,237 Posts
if i remember right, it is an 18MM socket to remove the caliper on the NBS. you will need a 15MM for the tie rods,13MM for the swaybar and shocks, and 22MM for the lugs.
 

·
Line-X of San Antonio
Joined
·
5,237 Posts
dont undo the torx ones. there is a regular bolt that holds the calipers on.
 

·
Drive It Like Ya Stole It
Joined
·
6,656 Posts
its a 3/4" or 18mm (depending on teh truck, ive seen both on NBS) that hold teh calipers on.
 
1 - 6 of 6 Posts
Top