GMC Truck Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
237 Posts
Discussion Starter · #1 ·
So we picked up a set of 2011 HD 20's for free but the lug pattern has changed and they won't fit on the 07 NNBS HD. Does anyone know if there is a way to make this work??

Thanks in advance
Brent
 

·
Registered
Joined
·
97 Posts
I know a guy that was trying to do the same thing, he ended up having a machine shop make him some adapters because he couldnt find anything
 

·
Registered
Joined
·
1,546 Posts
Jeeptech, if you want to sell the rims alone let me know
 

·
Registered
Joined
·
265 Posts

·
ΜΟΛΩΝ ΛΑΒΕ
Joined
·
8,527 Posts
Keep in mind a set of adapters will probably be 1.5" thick minimum and you will have to trim the studs to fit any spacer/adapter thinner than 1.75".

I know there were quite a few changes with the 2011 model, but I wonder if the 2011 shares the same 4 bolt pattern and ABS plug for the front hubs as the 2001-2010 hubs, and then swap the rear hubs as well, then either redrill or replace the rotors. Alot of work though for just a set of wheels.
 

·
Doin it for the lolz
Joined
·
318 Posts
I've seen newer wheels on older trucks around here. I wonder how they did it??

I would just go to a machine shop and get the brakes/hubs redrilled. Shouldn't cost too much, especially to run a free set of wheels.
 
1 - 6 of 6 Posts
Top