GMC Truck Forum banner
85781 - 85800 of 86107 Posts

·
Registered
2004 RCSB Silverado LS - 5.3 w/cam, stall, intake, lt headers and full exhaust
Joined
·
5 Posts
Looks clean, and I spy DRs, what’s the specs?
Thanks tdrumm! And everyone else for the likes. Yes it is just about as clean as it looks in the pictures, but it shall become even cleaner after receiving my love and tenderness 😁. The tires are junk btw they are almost 5 years old - still hookin though! Just ride like A**. :rolleyes:

Current set up:
-Volant CAI kit
-Longtube headers
-Custom 3" V-band exhaust (stock location all the way back)
-BTR stage 2 LS turbo cam + BTR valvetrain (226/231 duration - .610"/.608" lift - 113+4 LSA)
-GM 799 heads (yes I know this isn't a "mod"
-Yank 3000 stall converter
-4L60e built to handle ~700whp
-G80 gov-bomb junk rear diff (according to RPO code - also feels like it) w/factory 3.73 rear gear
-Hotchkis drop kit w/Edelbrock shocks (QA1s + tires are next up)

***Turbo coming as soon as "play" fund has reached the right $ amount.

**Yes if this does indeed still have the dreaded eaton auto-locking rear diff, it will be dumped for a full spool in the near future. I will be making an additional post about this.
 

·
Super Moderator
Joined
·
6,331 Posts
Build thread on trailer?
Dude I bought the trailer from rear ended a back hoe doing 70 with a ditch witch in the back. Frame rails are banana shaped, tool box that houses the pump and battery was destroyed, pump resivore was cracked, front of the dump bed was bowed way out, tarp bar was split in half, bunch of cross members were cracked. All I did was make the bananas run parallel( absolutely could not straighten them with my stuff), weld the crossmembers back together, bash the front of the dump bed back in far enough to clear a harbor freight trailer tool box that now houses the repaired pump and battery, pulled out the tarp shaft cut the ends off and tigged it back together, fixed all the cut wiring from the fire department and wrecker slapped some rattle can on the welded areas and now have a clapped out 2021 pj dump trailer 😂
 

·
Some dude on the internet
Joined
·
964 Posts
Dude I bought the trailer from rear ended a back hoe doing 70 with a ditch witch in the back. Frame rails are banana shaped, tool box that houses the pump and battery was destroyed, pump resivore was cracked, front of the dump bed was bowed way out, tarp bar was split in half, bunch of cross members were cracked. All I did was make the bananas run parallel( absolutely could not straighten them with my stuff), weld the crossmembers back together, bash the front of the dump bed back in far enough to clear a harbor freight trailer tool box that now houses the repaired pump and battery, pulled out the tarp shaft cut the ends off and tigged it back together, fixed all the cut wiring from the fire department and wrecker slapped some rattle can on the welded areas and now have a clapped out 2021 pj dump trailer
Better build thread than mine
 

·
Registered
Joined
·
2,103 Posts
Dude I bought the trailer from rear ended a back hoe doing 70 with a ditch witch in the back. Frame rails are banana shaped, tool box that houses the pump and battery was destroyed, pump resivore was cracked, front of the dump bed was bowed way out, tarp bar was split in half, bunch of cross members were cracked. All I did was make the bananas run parallel( absolutely could not straighten them with my stuff), weld the crossmembers back together, bash the front of the dump bed back in far enough to clear a harbor freight trailer tool box that now houses the repaired pump and battery, pulled out the tarp shaft cut the ends off and tigged it back together, fixed all the cut wiring from the fire department and wrecker slapped some rattle can on the welded areas and now have a clapped out 2021 pj dump trailer 😂
You have an impressive ability to create functioning vehicles out of things what most would deem scrap metal.
 

·
Rusty Hinges, porn star
Joined
·
3,635 Posts
Dude I bought the trailer from rear ended a back hoe doing 70 with a ditch witch in the back. Frame rails are banana shaped, tool box that houses the pump and battery was destroyed, pump resivore was cracked, front of the dump bed was bowed way out, tarp bar was split in half, bunch of cross members were cracked. All I did was make the bananas run parallel( absolutely could not straighten them with my stuff), weld the crossmembers back together, bash the front of the dump bed back in far enough to clear a harbor freight trailer tool box that now houses the repaired pump and battery, pulled out the tarp shaft cut the ends off and tigged it back together, fixed all the cut wiring from the fire department and wrecker slapped some rattle can on the welded areas and now have a clapped out 2021 pj dump trailer 😂
Idle hands are the devil's playground. At least we know you're not the devil. :ROFLMAO:
 

·
Wookie on the Beat
Joined
·
1,755 Posts
 

·
Registered
Joined
·
594 Posts


Most may not notice, but finally took those damn nerf bar brackets off the frame. No more sticking out like a sore thumb.

Also put 20s on Haydurrs yeep. Not too sure on the finish but we both love that wheel style

How many filters did it take to make my body work look this good? :jester:


Sent from my iPhone using Tapatalk
 
85781 - 85800 of 86107 Posts
Top