[GILISFLOYD]

We stuck a Zone 1.5 BL on my buddys truck over the weekend.
2.5" level, 2" rear block and 1.5" BL.
18x9 -11 offset with 295/70/18 Ridge Grapps.

Went together well, the zone kit is listed for '14-15 trucks but was only lacking the nuts for the top center bumper bolts. We just cut the factory captured nuts out of the stock bumper brackets and everything else was basically the same as the '14-15 trucks.
Had to carve out a fair amount for e-brake cable clearance, but that's normal.
The front fender liners needed to be ziptied back front & rear and a tiny bit of liner trimming was needed. No biggie.

Looks really good..

Sent from my XT1254 using Tapatalk

 

[rawalters117]

Finally bit the bullet last week on tires. I ended up going with the Falken Wildpeak A/T3W's, and I will say in person they look better than expected. For the price, its hard to argue against them. They are very quiet and smooth, and the truck rides exactly like it did with the stock tires.

I went with the 305/65/18s because 285s look so tiny on these trucks. They measure 33.6x12, and somehow I dont rub at all with zero trimming and a 2" level. Here are before and after pics. I will eventually post better pictures, because these dont do it justice. It looks beefy in person.

 

[Eric91Z]

Very nice with the Falkens and nice to see someone keeping the stock 18's. Was planning 285's on stock 18's when I do 2" level, but partly to keep size in check since we tow regularly with truck.


Sent from my iPhone using Tapatalk

 

[bayoubandit]

I need some help. I have a 17 4wd and an about to install a rcx 2.5. What size tire? 285/55r22 terra grapplers or 33x12.5 ridge grapplers?

 

[08Maxx]

I need some help. I have a 17 4wd and an about to install a rcx 2.5. What size tire? 285/55r22 terra grapplers or 33x12.5 ridge grapplers?

View attachment 66321

285/55 imo


Sent from my iPhone using Tapatalk

 

[sschup1130]

Do the 285/55/20 Toyo RT's, look way better then the Terra Grapplers.

 

[bayoubandit]

Do the 285/55/20 Toyo RT's, look way better then the Terra Grapplers.

I looked in to those but I need r22". All I can seem to find are 35 or 37 x 12.5 r22.

 

[NCSUboy]

Just bought a 2016 Crew cab Denali today, looking at the 3.5 inch rcx level, just curious would I have to run .5 inch wheel spacers in the front for this kit? Anyone have this kit on a denali?

 

[sschup1130]

Just bought a 2016 Crew cab Denali today, looking at the 3.5 inch rcx level, just curious would I have to run .5 inch wheel spacers in the front for this kit? Anyone have this kit on a denali?

That's an awfully nice truck to be considering that piece of shit level kit.
Why not do a real lift, the 4" Zone is pretty reasonable.

 

[sschup1130]

I looked in to those but I need r22". All I can seem to find are 35 or 37 x 12.5 r22.

Oops, missed that r22.

 

[NCSUboy]

That's an awfully nice truck to be considering that piece of shit level kit.
Why not do a real lift, the 4" Zone is pretty reasonable.

Seems pretty good in my opinion with a arms and diff drop, not just spacers alone...but I'm always open to new ideas

 

[Phildirt]

Seems pretty good in my opinion with a arms and diff drop, not just spacers alone...but I'm always open to new ideas

http://www.gmfullsize.com/threads/2...com/threads/2009-silverado-with-the-rc-3-5-suspension-lift.308406/#post-5916593

 

[NCSUboy]

http://www.gmfullsize.com/threads/2...com/threads/2009-silverado-with-the-rc-3-5-suspension-lift.308406/#post-5916593

Thanks for showing me that, hadn't seen any negative reviews until that one, any recommendations?

 

[Tiki]

Found some 18x9 cheyennes, guy wants $600. Worth it?


Sent from my iPhone using Tapatalk

Annnnnnnd then?

 

[MOhunter92]

Thanks for showing me that, hadn't seen any negative reviews until that one, any recommendations?

Just google that lift on a silverado. Nothing but bad reviews. It's too much on the front end it's a massive level, not a real lift. My buddy's cv axles have been shot after being replaced twice. Ball joints destroyed. Do a 2.5 RC kit or 4 inch lift from bds or zone or a RC 5 inch.


Sent from my iPhone using Tapatalk

 

[NCSUboy]

Just google that lift on a silverado. Nothing but bad reviews. It's too much on the front end it's a massive level, not a real lift. My buddy's cv axles have been shot after being replaced twice. Ball joints destroyed. Do a 2.5 RC kit or 4 inch lift from bds or zone or a RC 5 inch.


Sent from my iPhone using Tapatalk

Alright I'll look into them! Thanks for the help

 

[roundsy]

Does anyone have welds on these bishes yet? OG welds

Guess I never posted these in here.

 

[JCubs]

View attachment 65040 @Chewy21

whats the specs and tire size? rub?

 

[Col 10]

whats the specs and tire size? rub?

2.5" level 20x10's on 285/50 and no rub

 

[redz]

2.5" Motofab spacer. Truck rides great hoping this will hold me off on wanting to lift it.