GMC Truck Forum banner
641 - 660 of 10,012 Posts
Where I work, I have access to a machine shop, and have become fairly proficient with the tools. Based on the design of them, I think I could knock them out in a few hours. Its not so much the time spent, it would just give me something to do in my free time. But thanks for the input.
 
looks good man but when measuring the amount you lift a truck you only measure the amount of lift you got from the quicklift coil overs and and rear not inclding the lift from the tires. also i hope your not running them bags with air in them while not having a load..... the purpose of the air bags in the back is for when carrying a load to assist in the suspension. but if your running the bags stiff enough to have 4inches of lift from them your truck must ride worse then a tank....
Thanks for the compliment shae, i guess i should have been more clear when describing my bags- i dont ride around with them inflated, as even 10 psi makes the rear end stiff as a board. I meant to say that fully lifted in the back (about 30-40psi with no load) will raise the bed up about 4 inches. My eventual plan is no run an onboard air supply to the bags and to be able to control the psi with a cab mounted regulator....
 
Yea lots of rubbing but a little bit of trimming will solve the problem. No regrets on the spacers at all, the wheel and tire stick out perfect for me (It's probably an inch out of the fender). Yes they're hub centric spacers. Building material is normal since I'm a construction contractor. Any more questions???
If you're running 2" spacers, what type of backspacing would that be for an aftermarket rim to achieve the same look? I love the stance, thinking 20x9's with 33's but not sure what backspacing to get.

what did you have to trim to alleviate rub?
 
20x10s -24mm offset 33x12.50x20 toyo mt's on rc 2'' level
Image
truck looks sick dude, i agree with the other guy loose the tails for oem tails. anyway, what wheels are those and how much did you get em for, i really like em.:big_banana_Dance:
 
hey bruce bruce45 u no anything else about the red truck about like any trimming required, i have the same truck but with 2.5lk and 1.5 bl, really like the rims. and any more photos would be great also.
 
well i wasnt sure if it was his truck or someone elses he knew that he had gotten photos of and was kind enough to post on here for us all to see, but any additional info on the truck would be appreciated
 
well i wasnt sure if it was his truck or someone elses he knew that he had gotten photos of and was kind enough to post on here for us all to see, but any additional info on the truck would be appreciated
It's just a 2" rc leveling kit. 20x10 moto metal 961s 33" Toyo mts. Not much trimming is involved I'm just good with a cutting wheel
 
thanks brandon, and again great looking truck, hope to see some more pics of the truck soon
 
ryan what do u have planned for the stock rims? and the leveling kit turned out good looks great
 
641 - 660 of 10,012 Posts