[Big Red Z71]

should be a 1" lower strut spacer and a .25" upper strut spacer

I'd run the stock rear block or get a smaller one

 

[ZX10R]

They may have just left the small spacer out. The 2" kit is just a 2" spacer. The 2.5" kit comes with the 2" spacer and a smaller spacer and 2" rear blocks. You probably got it all minus the small spacer

They sent kit #1304, email receipt shows I paid for kit #1303.

 

[ZX10R]

They may have just left the small spacer out. The 2" kit is just a 2" spacer. The 2.5" kit comes with the 2" spacer and a smaller spacer and 2" rear blocks. You probably got it all minus the small spacer

should be a 1" lower strut spacer and a .25" upper strut spacer

I'd run the stock rear block or get a smaller one

Yea, it's missing the upper strut spacers and rear blocks. Just sucks I gotta pay labor again to have the upper spacers installed, then pay to have it aligned again. Thanks guys for the help.

 

[Big Red Z71]

just do it yourself imo

then you only have to pay for the alignment. another member and I threw my upper spacer in in like 20 min

 

[ZX10R]

just do it yourself imo

then you only have to pay for the alignment. another member and I threw my upper spacer in in like 20 min

Not hard to do? What all does it entail? Tools required?

 

[Big Red Z71]

Not hard to do? What all does it entail? Tools required?

impact wrench, sockets, jack, uhh thats it I think

 

[DMDPZ71]

Not hard to do? What all does it entail? Tools required?

7/8 socket for lugnuts
18mm for upper strut bolts
i believe the upper ball joint is a 18mm also
jack and prybar

 

[Alecks]

7/8 socket for lugnuts
18mm for upper strut bolts
i believe the upper ball joint is a 18mm also
jack and prybar

upper BJ is 18mm

 

[Dmanj]

The instructions are available on rough country's website. They explain everything and list all the tools required.

 

[DMDPZ71]

Really need to demold my doors..

 

[WildChevys]

and get rid of z71 sticker, would look so clean

 

[Alex.]

won't be anymore 35s on the welds soon :secret:

 

[DMDPZ71]

and get rid of z71 sticker, would look so clean

not a bad idea.. may do that also

 

[HillBilly4460]

Just installed the TGC 2.5" level kit. She dirty, but we've been havin s##t weather here. Need to get the rims and tires next, and some tint. Love the level kit though, truck still rides good. Would definitely recommend this kit to anyone. Thankful I didn't get any cali lean to it.

 

[KerrsLight]

Installed my TGC 2.5" last weekend and picked up some 2014 LTZ wheels. They came with some goodyears so I'll just ride on them until I find a good price for some Toyos. Was partial to the wheels at first, but they are really starting to grow on me. I bet once I get some M/T's on there, they'll look pretty good.

 

[Alex.]

clean rims with new 33" toyos and dirty truck in background

 

[ABCman]

Needs less offset rims if you gonna run 33s :imo:

 

[Alex.]

you mean like I need more offset? I'm trying to sell the welds now and get 20x10 preds

 

[ZX10R]

2" Rough Country leveling kit, will install other. 5" later tonight, but here is a cleaned up pic, Lotta room for bigger tires

 

[nando500]

First time posting. Truck is a little dirty from the weather we have experienced around the dfw. This is it with the 2" daystar leveling kit. After I noticed that the nose was about 1" higher than the rear so I replaced the stock blocks for the 2". I am wanting to get tires and debating whether or not to take off the step rails.

[/URL][/IMG]